Electrical Installations in Birmingham for Homes and Businesses

Sam Ward Electrical carries out electrical installations in Birmingham for homes, landlords, developers and businesses. That covers new circuits, extra sockets, indoor and outdoor lighting, kitchen and bathroom electrics, consumer units, three-phase supplies and commercial fit-outs. Every installation is tested and certified to BS 7671, and notifiable work is registered under Part P.

Sam Ward Electrical, NAPIT registered (membership 63406). Last reviewed:

At a glance

Who
Homeowners, landlords, developers, builders and businesses
What
New circuits, sockets, lighting, showers, consumer units, three-phase power and commercial fit-outs
Where
Birmingham, Kings Heath and the wider West Midlands
How long
A single new circuit often takes a few hours to a day; fit-outs are planned in stages
Certification
Electrical Installation Certificate or Minor Works Certificate, plus Part P notification where required
How to book
Call 07917 533653 or send an enquiry for a no-obligation quote

What electrical installations in Birmingham do we carry out?

We install everything from a single extra socket to the complete wiring of a new build or commercial unit. The work falls into two groups.

Domestic electrical installations

  • New build electrical installations
  • Consumer unit installations
  • Indoor and outdoor lighting
  • Socket and switch installations
  • Kitchen electrical installations
  • Bathroom electrics and electric showers
  • Smart home technology
  • Garden power and security lighting
  • EV charging points and battery storage
  • Full house rewires

Commercial electrical installations

  • Office electrical fit-outs
  • Commercial and LED lighting
  • Emergency lighting systems
  • Three-phase power installations
  • Distribution board installations
  • Data cabling and structured wiring
  • Fire alarm installations
  • Commercial EV charging infrastructure
Outdoor wall light with PIR sensor, typical of our electrical installations in Birmingham
An up-and-down outdoor wall light with a PIR motion sensor.

Our electrical installations in Birmingham are planned with you first, so sockets, switches and lights end up where you actually need them.

Do I need a certificate for new electrical work?

Yes. New circuits come with an Electrical Installation Certificate, and smaller additions to an existing circuit come with a Minor Electrical Installation Works Certificate. Work that is notifiable under Approved Document P also gets a Building Regulations compliance certificate, which we arrange through NAPIT.

Which certificate you receive, and whether the job is notifiable under Part P
JobCertificateNotifiable under Part P?
Extra socket on an existing circuit (not in a bathroom)Minor Works CertificateNo
New circuit, such as a cooker, shower or EV chargerElectrical Installation CertificateYes
Consumer unit replacementElectrical Installation CertificateYes
Alteration to a circuit in a room with a bath or showerMinor Works or Installation CertificateYes
Like-for-like replacement of a socket or light fittingNot usually requiredNo

Can you add sockets without rewiring the house?

Usually, yes. If the existing circuit is in good condition and has spare capacity, we can extend it to add sockets or lights. We test the circuit first and will tell you honestly if anything needs upgrading, including a partial or full rewire where the wiring is too old to extend safely.

How do new-build and renovation installations work?

New-build and renovation work is done in two stages. First fix runs the cables and back boxes before plastering; second fix fits the sockets, switches, lights and consumer unit once the walls are finished. We work alongside builders and plasterers so the electrics are ready at the right time.

Do you install three-phase and commercial systems?

Yes. We install three-phase supplies, distribution boards, LED and emergency lighting and power for offices, retail units, restaurants, warehouses, schools and industrial premises. Commercial electrical installations in Birmingham are scheduled to keep disruption to your business as low as possible, and every circuit is tested and certified before handover.

Why choose Sam Ward Electrical?

  • NAPIT registered, membership 63406
  • TrustMark licensed, licence 3612738
  • More than 10 years in the electrical trade
  • Fully insured
  • Work tested and certified to BS 7671
  • Part P notification handled for you

To discuss electrical installations in Birmingham, call 07917 533653 or send an enquiry. If your fuse box is old, read our guide on when to replace a consumer unit, and if you drive an electric car we can add a circuit for an EV charger.

Electrical Installation FAQs

How long does it take to install a new circuit?

Most single new circuits, such as a cooker or garage supply, take from a few hours to a day. The time depends on the cable route, access under floors and in ceilings, and whether the consumer unit has a spare way.

Will I need a new consumer unit for extra circuits?

Not always. Older fuse boxes without RCD protection, or boards with no spare capacity, often need replacing before new circuits can be added. We inspect your existing board and explain the options before any work starts.

Do you install electric showers?

Yes. An electric shower needs a dedicated circuit of the right size, and the work is notifiable because it is in a room with a bath or shower. We check your supply can take the shower rating before we quote.

Do you install smart home technology?

Yes. We wire and install smart lighting controls and other smart home devices, and we make sure your circuits and consumer unit can support them safely.

Do you carry out commercial electrical installations?

Yes. As well as homes, we install power, lighting, distribution boards and three-phase supplies for offices, shops, restaurants, warehouses, schools and industrial premises across Birmingham and the West Midlands.

Guides to read first

MCS certified logo NAPIT registered logo TrustMark Government Endorsed Quality logo RECC (Renewable Energy Consumer Code) logo Consumer Protection Association logo

“Sam installed a new electric oven for us and did an amazing job. Sam is really friendly and professional, offered us a clear and detailed quote for the work, and completed the work in a really good turn around and to a high standard. Sam was punctual and really easy to communicate with and I highly recommend him!”

Maddy Davies

Birmingham

“Sam recently upgraded my consumer unit and installed a MyEnergi Zappi charger, including some integration work with my existing solar setup and Shelly monitoring devices. From start to finish, he was professional, punctual, and really easy to work with. He took the time to explain what he was doing, worked neatly, and made sure everything was tested and tidied up properly before leaving. The installation looks great, everything functions exactly as it should, and his attention to detail was excellent throughout. I’m really pleased with the quality of the work and wouldn’t hesitate to recommend Sam to anyone needing an EV charger or electrical upgrade done to a high standard.”

Matt Watkins

Birmingham

“Sam provided an excellent service from start to finish. He was professional, precise in his work, and genuinely friendly throughout the whole process. The job was completed to a very high standard, with great attention to detail. I wouldn’t hesitate to use him again and would happily recommend him to anyone looking for a reliable electrician.”

Jack Montgomery

Birmingham

Need an electrician in Birmingham or the West Midlands? Call Sam Ward Electrical on 07917 533653 or send an enquiry online for a no-obligation quote.

Request a quote